The features available vary with the device connected.Īs for USB TETHER SHOOTING AUTO, except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption.
Use the camera mode dial to switch between still photography and movie recording. Remote photography and movie recording are available when the camera is connected to a compatible device such as a gimbal or drone. FUJIFILM X Acquire can also be used to save and load camera settings.
Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe ® Photoshop ® Lightroom ® + Tether Plugin, or FUJIFILM X Acquire. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected. The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera functions normally when not connected. OptionĬonnecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. View computers to which the camera has recently connected.Īdjust settings for connection to optional Fujifilm instax SHARE printers.Īdjust settings for connection to external devices.
MANUAL SETUP: Choose the network from a list ( SELECT FROM NETWORK LIST) or enter the name manually ( ENTER SSID). OptionĬhoose the method used for connection to computers via a wireless LAN. Manually choose the IP address ( IP ADDRESS), network mask ( NETMASK), and gateway address ( GATEWAY ADDRESS).Īdjust settings for connection to computers via wireless LAN. Choose the network from a list ( SELECT FROM NETWORK LIST) or enter the name manually ( ENTER SSID).ĪUTO: The IP address is assigned automatically. MANUAL SETUP: Manually adjust settings for connection to a wireless network. SIMPLE SETUP: Connect to an access point using simple settings. NETWORK SETTINGĪdjust settings for connection to wireless networks. The IMAGE TRANSFER ORDER option in the C (playback) menu can be used to select pictures for upload when AUTO IMAGE TRANSFER is off.
When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload to paired devices will begin shortly after you exit to playback or turn the camera off.
Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. LOCATION&TIME: Synchronize the time and location. OFF: Photos are not marked for upload as they are taken.Ĭhoose whether to synchronize the camera to the time and/or location provided by a paired smartphone. Mark JPEG photos for upload as they are taken. ON: Mark photos for upload as they are taken. OFF: The camera does not connect via Bluetooth. ON: The camera automatically establishes a Bluetooth connection with paired devices when turned on. The selected device will also be removed from the devices listed in SELECT PAIRING DESTINATION. Select NO CONNECTION to exit without connecting.ĭelete pairing information for selected devices. To pair the camera with a smartphone or tablet, select this option, then launch FUJIFILM Camera Remote on the smart device and tap PAIRING REGISTRATION.Ĭhoose a connection from a list of devices with which the camera has been paired using PAIRING REGISTRATION. For more information on wireless connections, visit:Ī Connecting to Smartphones and Computers